Huidige pagina:

Daf XF 11.02 - 12.05 3D Inleg dashboard Interieurset aansluitend en pasgemaakt op he 18 -Teile

Bouwer en model van het voertuig: Daf
Model: XF
Variant: Alle modellen
Bouwjaar sinds:11.02 - 12.05
Aantal Delg: 18
Positie van onderdelen: interieurafstemming, dashboard, deuren, ventilatieopeningen, dashboardkastje, stuurwiel, lichtschakelaar, versnellingsbak, interieurdecoratie
Glans in voertuigkleur, hout, koolstofvezel, koolstof, chroom, beplating, aluminium

Read moreShow less

€ 129,99

Productie op 2-7 dagen

Staat

Nieuw

Reference:

1304

Brand:

Love0

Add to compare0

Add to wishlist

Volumekorting

Aantal	Eenheidskorting	U bespaart
2	10%	€ 26,00
3	13.5%	€ 52,65

Productie op bestelling 48-72 uur. 50 Items

Scan the QR code to open this page on your phone.

Omschrijving

Exclusieve 3D voertuiguitrusting Woodline Decor de Luxe Topkwaliteit.

Een exclusieve upgrade voor uw voertuig - chic, elegant, waardevol
20 nobele of moderne ontwerpen om uit te kiezen. Of z. Als wortelhout, mahonie, aluminium, koolstof of techno is er voor elk type iets, alles voor dezelfde prijs
3D-effect door 2,5-5 mm dik materiaal resulteert in een hoogglanseffect (gemaakt van polyurethaan PUR)
Hoogwaardige afwerking - een rond ding zonder hoeken en randen. Het oppervlak komt overeen met een 10-voudige coating met hoogglans polish
Absoluut op maat gemaakt voor het gespecificeerde voertuig, 3D High Performance Sterke acrylklevende achterkant hittebestendig en koudebestendig, flexibel en flexibel. Niet geschikt om over bestaande decoratieve bijlagen te plakken.
PU-PUR Krasvrij en splintervrij - geen risico op letsel bij ongevallen (TÜV-veiligheidscertificaat)
Snelle montage in ca. 10-15 minuten - zelfklevend zonder het gebruik van agressieve, giftige superlijm. Beste hechting gegarandeerd.
Weer verwijderbaar - geen schade aan het substraat tijdens de installatie mogelijk.
Perfect geschikt voor honderden voertuigen.
Alle sets zijn geschikt voor het opgegeven voertuig. Kies uit 20 nobele of moderne ontwerpen om uit te kiezen. Of z. Als wortelhout, mahonie, aluminium, koolstof of techno is er voor elk type iets. - alles tegen dezelfde lage prijs! Bekijk ons voorbeeld in de installatie-instructies van de juiste voor-en-na foto's en beslis zelf.

Nieuw Auto interieur, bijvoorbeeld in aluminiumlook, INOX-look, chroomlook.

Cockpit PVC-foliedesign voor elke smaak. Aluminium cockpitdecor, chromen cockpit, inox Gebouwd decor

latest resin technology - flexible compound that avoids cracking
Heat resistant to 195 degrees C - UV and Flame resistant too!
Easy mounting with Adhesive Backing - in as little as 10 minutes
Full Fitting Instructions Provided
Easily removed if you want to sell your Vehicle
Non Toxic - no harmful substances for Personal Health
Excellent value for your Car,Pick-Up, Van, Lorry, Bus giving an excellent finishing touch.

Dash kit installation

The installation process requires certain patience and attention to details, so please, read this instruction carefully before installing your dash kit. This guide includes installation instruction for both molded (3D) dash kits.

STEP 1: Surface cleaning

Before applying dash kit elements you need to clean the area of application in order to remove all silicone residue.

Apply some wax and grease remover to a cotton cloth and thoroughly wipe the surface. Wax & Grease Remover can be purchased in any auto parts and accessories store.

Do not use any lacquer thinner as it will damage the surface of your dashboard.

Repeat the cleaning process several times until all silicon is removed. To test whether the surface is ready for the next step, apply a strip of insulating tape. If tape sticks to the surface and makes a “ripping” sound when pulled off, proceed to the next step. If the tape peels off without resistance, repeat the cleaning procedure.

Clean the surface with isopropyl alcohol. Avoid applying alcohol to any clear plastic surfaces including gauges, clocks, radios or warning lights. The surface where your new dash kit will be installed must be clean of dirt, wax, silicon, grease etc. Otherwise kit pieces may not adhere properly. Repeat tape test until you are satisfied with result.

STEP 2: Dry fitting

Make sure that all pieces fit designed place without removing the backing from the part. Hold the piece where it is supposed to be installed and make sure that all buttons and switches are accessible and move freely. If any component doesn’t fit its place, contact your store's customer support as soon as possible.

STEP 3: Installation

Most of the components that install on flat or horizontal surfaces can be installed with the adhesive, that is already applied at the part by the manufacturer. However, installation of narrow components, corners, pieces that are installed on vertical surfaces require an adhesive promoter.

Start with the pieces that can be installed without adhesive promoter. Peel off the backing to expose the adhesive. Place the component to its place and press down lightly with your fingers. If the component is installed properly, apply pressure using a soft clean cloth. Proceed with pieces that can be installed without using adhesive promoter.

Big 3D components should be installed from side-to-side or top-to-bottom. Finally, use hair dryer to warm each piece and re-apply pressure.

STEP 4: Installing 3D pieces

Define the order of installation for the remaining 3D components.

Wear rubber gloves when using an adhesive promoter. Don't let it contact any surface that will not be covered by your dash kits, as adhesive promoter discolors everything it contacts.

Start applying adhesive promoter to such areas, as corners, around air vents, narrow areas, vertical and down facing surfaces. After 5 minutes start applying first pieces in the order you've determined before. Once you are satisfied with the placement of a component, apply pressure to the entire part surface using a soft cloth. Try to complete installation within 20 minutes.

STEP 5: Installing 3D pieces

Make sure, that 3D pieces of your dash kit are undamaged. Then carefully peel off the backing from all 3D component and place them face down to the soft surface. Mist the trim piece adhesive surfaces with the "dash spray" supplied with the dash kit. Place each 3D part to its position. Gently press down.

STEP 6: Final touches

Once all pieces are installed, inspect the carefully to make sure that your dash kit is installed properly.

It takes 72 hours for the adhesive to fully cure. During which time the dash trim pieces should not be tampered with. After 72 hours remove finger prints and smudges using soft, dry cloth.

Daf XF 11.02 - 12.05 3D Inleg dashboard Interieurset aansluitend en pasgemaakt op he 18 -Teile

Menu

Settings