- On sale!
Designer Trim Audi Q5 8R 2013 Interior Set
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Audi Q5. Choose the finish and verify the parts diagram before ordering.
| Make | Audi |
|---|---|
| Model | Q5 |
| Model years | 2013 |
| Generation | 1st generation (8R) |
| Generation built | 2008–2016 |
| Product type | Custom interior trim |
| Parts included | Not specified |
| Product reference | Product ID 4337 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · Designer Trim
Designer Trim Audi Q5 8R – complete interior set
Designer Trim covers every trim surface on the parts diagram of the Audi Q5 8R, drawn for model year 2013, in one finish of your choice: carbon look, brushed aluminium, wood or a colour matched to your vehicle. The diagram is based on model year 2013; this generation was built 2008–2016. Compare the diagram with your car before ordering – trim layouts can change within a generation.
- VehicleAudi Q5 8R
- Diagram model year2013
- Generation built2008–2016
- SetComplete interior set
- FinishYour choice

Material: 3D domed finish
Each piece combines a 3M adhesive base, a decorative film and a clear polyurethane (PU) dome of about 3.5 mm with rounded edges – glossy, with real depth.
Carbon and aluminium looks are decorative surfaces, not structural carbon fibre or solid metal.
Finish or colour match
Choose the finish in the selector above. For a colour match, write your paint code or colour name in the order comment.
The photos show material examples; the colour shown on the product image is not automatically your selection.

Before ordering
- Compare the parts diagram with your interior: trim shapes, screens, gear selector and climate panel.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the pieces on the diagram are included.
Made for you, fitted by you
We cut and dome every piece after your order. Pieces are applied on clean, dry, intact original trim – nothing is removed.
For large sets, a detailing or wrap studio can do the fitting.


A fresh look for the dashboard
A console scratched by the last owner, a trim strip marked by keys: on a used car those details shout at you. The kit for Audi Q5 covers scratches and wear on the areas it trims. It does not repair them, it hides them under a fresh decor that also protects the original surface from here on.
- Compare the parts diagram with your dash before ordering
- Not sure about a piece? Send a photo via the contact form
- Each kit has its own number of parts, as per the diagram
Check the parts diagram against your dashboard, then choose between carbon effect, brushed aluminium and piano black.
Fitting the parts without stress
- Offer each piece up dry before peeling the backing, to check how it lines up with edges and joints.
- Peel the backing gradually and press from the centre outwards to push the air out.
- Never fit anything on an airbag or a moving control; for tricky shapes, call in a wrapper or a detailer.
Designer Trim kit: your order comment is the production order
A Designer Trim kit is a significant investment, between €110 and €1,500 depending on the scope of the project. We don't want you to be disappointed when it arrives. So if anything makes you hesitate, please list point by point in the order comment what you want to see and receive:
- Finish or colour: the decor you want (for example carbon effect, brushed aluminium, wood effect) or your body colour code if the decor should match the paintwork. A matte finish is available on request, coated in our workshop.
- Surfaces: the parts to be trimmed, such as the screen surround, the climate control panel, the door panels, the centre console or the glovebox.
- Driving side and equipment: left-hand or right-hand drive, plus the trim level or any particular features of your vehicle.
- ExtraShield films: whether you would also like the protective films for the screens.
- Photos: pictures of your dashboard and the surfaces concerned, so we see what you see.
This comment is your production order: we work exactly to your instructions. Your payment counts as prepayment for the design project.
FAQ
What is included?
All trim pieces drawn on the diagram for this vehicle, in one finish.
Can you match my body colour?
Yes – give us the paint code or colour name in the order comment.
What about the screens?
ExtraShield screen protector films for many displays are available as separate products.
Want us to check first? Send photos of your interior and the product name via the contact form before we start production.
Buyer guide · Material guide · Installation guide
CockpitDekor · Designer Trim · made to order
- Model
- 2013
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.