Shopping Cart
Chrysler Crossfire 2004-2008 Interior Trim Kit, 35 pcs
3 Reviews
CHCX-04-35
€189.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Chrysler Crossfire. Choose the finish and verify the parts diagram before ordering.
| Make | Chrysler |
|---|---|
| Model | Crossfire |
| Model years | 2004-2008 |
| Product type | 3D dashboard trim kit |
| Parts included | 35 |
| Product reference | CHCX-04-35 / Original Reference: 2603 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Chrysler Crossfire dashboard trim kit, 35 pieces (2004–2008)
A set of 35 self-adhesive trim pieces cut to the dashboard of the Chrysler Crossfire, model years 2004–2008. The pieces go on top of your original panels – nothing is removed or drilled.
All kits for Chrysler Crossfire · Chrysler dashboard trim kits
- VehicleChrysler Crossfire
- Years2004–2008
- Pieces35
- ReferenceCHCX-04-35
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Carbon effect for the drive you love
Carbon fibre dash trim is one of the most searched upgrades for sports cars, and it deserves an honest answer. On Chrysler Crossfire our carbon is a printed effect under a clear domed PU layer, not woven carbon fibre. What you get is the look, a consistent pattern from part to part and a glossy depth.
- Black or silver carbon effect, an honest decorative effect
- Pre-cut to the parts diagram of the kit
- Sticks onto existing surfaces, no dismantling
A doubt about your version? Send us a photo before the kit goes into production.
Choosing between gloss and satin
- The kit arrives high-gloss, with a deep shine from the clear PU dome.
- For a satin motorsport look, spray one thin coat of clear matt lacquer before fitting and let it dry; test on a small part first.
- Clean the trim with a barely damp microfibre cloth, no abrasives, whichever finish you go for.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Chrysler Crossfire?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230005314
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Careful fitting in cold weather
In cold weather I would not rush the installation. I dry fitted the piece several times, checked the dashboard line again, then removed the rear backing film and pressed from the centre out. A small squeegee helped finish the corners cleanly.
Presné diely po vyčistení povrchu
Dobré riešenie pre poškriabaný plast v interiéri. Povrch bolo potrebné dôkladne odmastiť, potom dekor držal dobre.
Careful fitting in cold weather
In cold weather I would not rush the installation. I dry fitted the piece several times, checked the dashboard line again, then removed the rear backing film and pressed from the centre out. A small squeegee helped finish the corners cleanly.
Tap to zoom
