Shopping Cart
Citroen Jumper 2021 Interior Trim Kit, 22 pcs
3 Reviews
5014A
€104.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Citroen Jumper. Choose the finish and verify the parts diagram before ordering.
| Make | Citroen |
|---|---|
| Model | Jumper |
| Model years | 2021 |
| Generation | X290 platform, 2021/22 interior update |
| Generation built | 2014–today |
| Same cab platform as | Fiat Ducato · Peugeot Boxer |
| Product type | 3D dashboard trim kit |
| Parts included | 22 |
| Product reference | 5014A |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Citroen Jumper dashboard trim kit, 22 pieces (2021)
A set of 22 self-adhesive trim pieces cut to the dashboard of the Citroen Jumper, model years 2021. The pieces go on top of your original panels – nothing is removed or drilled. The same cab is used in the Fiat Ducato and Peugeot Boxer, so the kit is a match there too – check the parts diagram against your dashboard.
All kits for Citroën Jumper Relay · Citroën dashboard trim kits
- VehicleCitroen Jumper
- Years2021
- Pieces22
- Reference5014A
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Dash trim kit for camper vans
The van started out on deliveries, then one winter of conversion changed everything: bed, kitchen, insulation, a fan in the roof. The cab, though, is still the same grey as on day one. A dash trim kit for Citroën Jumper Relay finishes the build right where you spend most of your time on the road.
- Covers marks from the van's working life
- Protects the original surfaces from then on
- Hides wear without repairing it
Compare the parts diagram with your cab and finish your conversion in style.
Checking the right version
- Compare the parts diagram with your cab, as vans come in many versions.
- Check the year, the radio, the climate control and the gearbox.
- Choose the driving side at checkout and send a photo if anything is unclear.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Citroen Jumper?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230005826
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Montage bei Kälte mit Geduld
Bei kaltem Wetter sollte man die Montage nicht überstürzen. Ich habe das Teil mehrmals trocken angepasst, die Linie am Armaturenbrett geprüft, dann die hintere Schutzfolie entfernt und von der Mitte nach außen angedrückt. Getestet am Innenraum eines Mercedes Sprinter mit Honey Burl-Optik.
Gute Passform nach Reinigung
Die Qualität gefällt mir. Bei der Montage musste ich die Fläche gründlich entfetten. Danach saßen die Teile gut, auch wenn die Ausrichtung etwas Zeit brauchte. Getestet am Innenraum eines Volkswagen Transporter mit Brushed Aluminium-Optik.
Montage bei Kälte mit Geduld
Bei kaltem Wetter sollte man die Montage nicht überstürzen. Ich habe das Teil mehrmals trocken angepasst, die Linie am Armaturenbrett geprüft, dann die hintere Schutzfolie entfernt und von der Mitte nach außen angedrückt. Getestet am Innenraum eines Iveco Daily mit Honey Burl-Optik.
Tap to zoom
