Shopping Cart
Ford Maverick II 2000-2005 Interior Trim Kit, 25 pcs
3 Reviews
FOMI-00-25
€134.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Ford Maverick II. Choose the finish and verify the parts diagram before ordering.
| Make | Ford |
|---|---|
| Model | Maverick II |
| Model years | 2000-2005 |
| Product type | 3D dashboard trim kit |
| Parts included | 25 |
| Product reference | FOMI-00-25 / Original Reference: 1261 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Ford Maverick II dashboard trim kit, 25 pieces (2000–2005)
A set of 25 self-adhesive trim pieces cut to the dashboard of the Ford Maverick II, model years 2000–2005. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleFord Maverick II
- Years2000–2005
- Pieces25
- ReferenceFOMI-00-25
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Mud outside, a tidy cab inside
Brushed aluminium echoes the protection plates, piano black suits a modern pickup, a solid colour can match the paint. For Ford Maverick there are over 40 finishes depending on the kit. Pick the one that still pleases you after a week on gravel tracks with the windows down.
- Sticks onto existing surfaces
- Dashboard stays in place
- Nothing to strip out before the next trip
Choose the finish that suits your 4x4 and check the diagram against your dashboard.
Preparing a cab that lives outdoors
- Shake out the mats and vacuum the dashboard: dust is the main enemy of a clean fit.
- Degrease every surface carefully, especially if you use protectant sprays on the plastics.
- Fit under cover, out of the wind, rather than at the trailhead, and keep a matt option in mind: one thin coat of clear matt lacquer before fitting, dried, then fit.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Ford Maverick II?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230007950
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Buona brillantezza dopo pressione
Alla luce diretta del sole lo strato PU diventa duro, quasi come vetro, e prende molta brillantezza. Il risultato è pulito quando gli angoli vengono rifiniti con una spatola morbida.
Goede levering en eenvoudige montage
De onderdelen pasten goed rond de console en ventilatieroosters. De afwerking ziet er professioneel uit. Montage zonder boren ging gemakkelijk met rustig uitlijnen.
Buona brillantezza dopo pressione
Alla luce diretta del sole lo strato PU diventa duro, quasi come vetro, e prende molta brillantezza. Il risultato è pulito quando gli angoli vengono rifiniti con una spatola morbida.
Tap to zoom
