Shopping Cart
Honda Odyssey RL3 2005-2010 Interior Trim Kit, without Navigation, didital AC Control
3 Reviews
HDA-30A
€169.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Honda Odyssey. Choose the finish and verify the parts diagram before ordering.
| Make | Honda |
|---|---|
| Model | Odyssey |
| Model years | 2005-2010 |
| Generation | 3rd generation (RL3, RL4) |
| Generation built | 2005–2010 |
| Variant / specification | Full Set; Without Navigation system; Didital AC Control |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | HDA-30A |
| Versions in our shop | Set: basic set / full set · Navigation: with NAVI / without NAVI · Climate control: automatic / manual |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: navigation, climate control, transmission. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Honda Odyssey RL3 dashboard trim kit, Full Set, Without Navigation system (2005–2010)
A set of self-adhesive trim pieces cut to the dashboard of the Honda Odyssey RL3, model years 2005–2010. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleHonda Odyssey RL3
- Years2005–2010
- VersionFull Set, Without Navigation system, Didital AC Control
- ReferenceHDA-30A
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Not a sticker, a domed 3D trim part
Want the carbon or colour without the shine? The kit for Honda Odyssey ships high-gloss. Before fitting, spray one thin coat of clear matt lacquer from an aerosol, such as SprayMax Klarlack matt or NOVOL Clearcoat Matt, let it dry, then fit. Test on a small part first. We don't ship aerosols, so pick a can up locally.
- Ships high-gloss; one thin coat of clear matt lacquer gives a matt look
- Wipe clean with a barely damp microfibre cloth
- No abrasives, just a quick wipe before the meet
Pick the finish for your next car meet and compare the parts diagram with your dash.
Preparing the surfaces before fitting
- Clean and degrease the original plastic: dust, silicone and trim dressings stop the 3M adhesive from gripping properly.
- Let everything dry completely and work under cover, in a mild garage, with good low-angle light.
- Lay the pieces out in the order of the diagram and have your own tools ready, as none are supplied with the kit.
FAQ
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Honda Odyssey?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230010479
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Ecken sauber mit Rakel angedrückt
Für eine saubere Montage braucht man Geduld. Erst Kunststoff reinigen, entfetten und trocknen lassen, dann mehrmals trocken anpassen. Erst danach die Schutzfolie abziehen und das Dekor fest andrücken.
Netjes verpakt en makkelijk te monteren
Mooie kwaliteit en duidelijke pasvorm. De levering verliep zonder probleem. Het schoonmaken van het dashboard was belangrijk, daarna hechtte het decor goed.
Ecken sauber mit Rakel angedrückt
Für eine saubere Montage braucht man Geduld. Erst Kunststoff reinigen, entfetten und trocknen lassen, dann mehrmals trocken anpassen. Erst danach die Schutzfolie abziehen und das Dekor fest andrücken.
Tap to zoom
