Shopping Cart
Honda Odyssey RL3 2005-2010 Interior Trim Kit, without Navigation, manual AC Control
3 Reviews
HDA-30D
€169.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Honda Odyssey. Choose the finish and verify the parts diagram before ordering.
| Make | Honda |
|---|---|
| Model | Odyssey |
| Model years | 2005-2010 |
| Generation | 3rd generation (RL3, RL4) |
| Generation built | 2005–2010 |
| Variant / specification | Full Set; Without Navigation system; Manual AC Control |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | HDA-30D |
| Versions in our shop | Set: basic set / full set · Navigation: with NAVI / without NAVI · Climate control: automatic / manual |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: navigation, climate control, transmission. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Honda Odyssey RL3 dashboard trim kit, Full Set, Without Navigation system (2005–2010)
This kit covers the Honda Odyssey RL3 (2005–2010) with pre-cut decorative pieces. They are applied over the existing trim, so the original panels stay in the car.
- VehicleHonda Odyssey RL3
- Years2005–2010
- VersionFull Set, Without Navigation system, Manual AC Control
- ReferenceHDA-30D
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
A dashboard that leaves standard behind
On Honda Odyssey the carbon effect is not a flat film. Underneath the printed decor sits 3M 468MP transfer adhesive; on top, a clear, flexible two-component PU dome by COLOR DEC in Italy. Around 2–3 mm thick, with rounded edges and a glossy depth that catches the streetlights on the drive home from a meet.
- Black or silver carbon effect for the sporty look you are after
- Glossy PU dome by COLOR DEC, made in Italy
- Rounded edges and around 2–3 mm thick
Check the parts diagram against your dashboard, then choose between carbon effect, brushed aluminium and piano black.
Fitting the parts without stress
- Offer each piece up dry before peeling the backing, to check how it lines up with edges and joints.
- Peel the backing gradually and press from the centre outwards to push the air out.
- Never fit anything on an airbag or a moving control; for tricky shapes, call in a wrapper or a detailer.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Honda Odyssey?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230010486
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Hoeken netjes met rakel afgewerkt
Niet te snel plakken. Eerst dashboard schoonmaken, ontvetten, droog laten worden en meerdere keren passen. Daarna pas de beschermfolie verwijderen en vanuit het midden naar buiten aandrukken.
Calidad correcta y buen ajuste
Buena calidad y embalaje correcto. El montaje no necesitó taladros. Fue importante limpiar bien la superficie antes de presionar las piezas.
Hoeken netjes met rakel afgewerkt
Niet te snel plakken. Eerst dashboard schoonmaken, ontvetten, droog laten worden en meerdere keren passen. Daarna pas de beschermfolie verwijderen en vanuit het midden naar buiten aandrukken.
Tap to zoom
