Shopping Cart
Chrysler Pacifica RU 2017-2023 Interior Trim Kit, 18 pcs
3 Reviews
K0637A1
€109.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Chrysler Pacifica. Choose the finish and verify the parts diagram before ordering.
| Make | Chrysler |
|---|---|
| Model | Pacifica |
| Model years | 2017-2023 |
| Generation | 1st generation (RU) |
| Generation built | 2017–today |
| Product type | 3D dashboard trim kit |
| Parts included | 18 |
| Product reference | K0637A1 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Chrysler Pacifica RU dashboard trim kit, 18 pieces (2017–2023)
A set of 18 self-adhesive trim pieces cut to the dashboard of the Chrysler Pacifica RU, model years 2017–2023. The pieces go on top of your original panels – nothing is removed or drilled.
All kits for Chrysler Pacifica · Chrysler dashboard trim kits
- VehicleChrysler Pacifica RU
- Years2017–2023
- Pieces18
- ReferenceK0637A1
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Dash trim kit for modified car fans
Want the carbon or colour without the shine? The kit for Chrysler Pacifica ships high-gloss. Before fitting, spray one thin coat of clear matt lacquer from an aerosol, such as SprayMax Klarlack matt or NOVOL Clearcoat Matt, let it dry, then fit. Test on a small part first. We don't ship aerosols, so pick a can up locally.
- Piano black for a dark, clean cabin
- Solid colours to pick up a touch of the bodywork
- Brushed aluminium for a technical note on the console
Pick the finish for your next car meet and compare the parts diagram with your dash.
Getting a matt look, then keeping it clean
- Kits ship high-gloss: for a matt finish, spray one thin coat of clear matt lacquer on the parts before fitting and let it dry.
- A second coat gives a flatter but slightly hazy look, so try it on a small part first and buy the aerosol locally.
- Afterwards, wipe the trim with a barely damp microfibre cloth, never with abrasive products or a scouring pad.
FAQ
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Chrysler Pacifica?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230005406
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Pulire e provare a secco prima
La preparazione della plastica è fondamentale. Dopo pulizia e sgrassaggio l’adesivo tiene meglio. Ho controllato la posizione cinque volte prima di rimuovere la protezione posteriore. I graffi del cruscotto risultano ben coperti.
Gute Lieferung, saubere Montage
Die Lieferung kam gut verpackt an und alle Teile waren unbeschädigt. Die Qualität der Oberfläche wirkt sehr sauber. Nach dem Trockenanpassen war die Montage einfach, besonders weil die Teile gut zum Armaturenbrett passten.
Pulire e provare a secco prima
La preparazione della plastica è fondamentale. Dopo pulizia e sgrassaggio l’adesivo tiene meglio. Ho controllato la posizione cinque volte prima di rimuovere la protezione posteriore. I graffi del cruscotto risultano ben coperti.
Tap to zoom
