- On sale!
Designer Trim Volkswagen Touareg CR 2018 Interior Set
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Volkswagen Touareg. Choose the finish and verify the parts diagram before ordering.
| Make | Volkswagen |
|---|---|
| Model | Touareg |
| Model years | 2018 |
| Generation | 3rd generation (CR) |
| Generation built | 2018–today |
| Product type | Custom interior trim |
| Parts included | Not specified |
| Product reference | Product ID 4923 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · Designer Trim
Designer Trim Volkswagen Touareg CR – complete interior set
One finish for the whole interior: Designer Trim is the complete set of trim pieces for the Volkswagen Touareg CR (model year 2018 diagram), made to order in carbon look, brushed aluminium, wood or your vehicle colour. The diagram is based on model year 2018; this generation was built 2018–today. Compare the diagram with your car before ordering – trim layouts can change within a generation.
All kits for Volkswagen Touareg · Volkswagen dashboard trim kits
- VehicleVolkswagen Touareg CR
- Diagram model year2018
- Generation built2018–today
- SetComplete interior set
- FinishYour choice

Material: 3D domed finish
Each piece combines a 3M adhesive base, a decorative film and a clear polyurethane (PU) dome of about 3.5 mm with rounded edges – glossy, with real depth.
Carbon and aluminium looks are decorative surfaces, not structural carbon fibre or solid metal.
Finish or colour match
Choose the finish in the selector above. For a colour match, write your paint code or colour name in the order comment.
The photos show material examples; the colour shown on the product image is not automatically your selection.

Before ordering
- Compare the parts diagram with your interior: trim shapes, screens, gear selector and climate panel.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the pieces on the diagram are included.
Made for you, fitted by you
We cut and dome every piece after your order. Pieces are applied on clean, dry, intact original trim – nothing is removed.
For large sets, a detailing or wrap studio can do the fitting.


Your style, piece by piece
Are stick-on dash trim kits any good? Fair question, because a flat sheet of vinyl you trim yourself often ends up with the sticker look. The parts for Volkswagen Touareg arrive pre-cut to the parts diagram of the kit, shaped like the original trim pieces, so you are not freehanding a craft knife around air vents in a mate's garage.
- Made to order in the finish you choose
- Over 40 finishes depending on the kit
- Left-hand or right-hand drive, chosen at checkout
Pick the finish for your next car meet and compare the parts diagram with your dash.
Preparing the surfaces before fitting
- Clean and degrease the original plastic: dust, silicone and trim dressings stop the 3M adhesive from gripping properly.
- Let everything dry completely and work under cover, in a mild garage, with good low-angle light.
- Lay the pieces out in the order of the diagram and have your own tools ready, as none are supplied with the kit.
Designer Trim kit: your order comment is the production order
A Designer Trim kit is a significant investment, between €110 and €1,500 depending on the scope of the project. We don't want you to be disappointed when it arrives. So if anything makes you hesitate, please list point by point in the order comment what you want to see and receive:
- Finish or colour: the decor you want (for example carbon effect, brushed aluminium, wood effect) or your body colour code if the decor should match the paintwork. A matte finish is available on request, coated in our workshop.
- Surfaces: the parts to be trimmed, such as the screen surround, the climate control panel, the door panels, the centre console or the glovebox.
- Driving side and equipment: left-hand or right-hand drive, plus the trim level or any particular features of your vehicle.
- ExtraShield films: whether you would also like the protective films for the screens.
- Photos: pictures of your dashboard and the surfaces concerned, so we see what you see.
This comment is your production order: we work exactly to your instructions. Your payment counts as prepayment for the design project.
FAQ
What is included?
All trim pieces drawn on the diagram for this vehicle, in one finish.
Can you match my body colour?
Yes – give us the paint code or colour name in the order comment.
What about the screens?
ExtraShield screen protector films for many displays are available as separate products.
Want us to check first? Send photos of your interior and the product name via the contact form before we start production.
Buyer guide · Material guide · Installation guide
CockpitDekor · Designer Trim · made to order
- Model
- 2018
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.