Volkswagen Golf V Jetta 2003-2008 3D Interior Dashboard Trim Kit 16-Piece
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Volkswagen Golf V Jetta. Choose the finish and verify the parts diagram before ordering.
| Make | Volkswagen |
|---|---|
| Model | Golf V Jetta |
| Model years | 2003-2008 |
| Generation | 1K |
| Generation built | 2003–2009 |
| Product type | 3D dashboard trim kit |
| Parts included | 16 |
| Product reference | VWGV-03-16 / Original Reference: 1795 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, climate control, transmission. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Volkswagen Golf V Jetta 1K dashboard trim kit, 16 pieces (2003–2008)
A set of 16 self-adhesive trim pieces cut to the dashboard of the Volkswagen Golf V Jetta 1K, model years 2003–2008. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleVolkswagen Golf V Jetta 1K
- Years2003–2008
- Pieces16
- ReferenceVWGV-03-16

Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.

Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
FAQ
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Volkswagen Golf V Jetta?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.