Shopping Cart
- New
3D Rear & Wing Badge for Mercedes Sprinter – Switzerland – 90 mm
RB-MB-SPR-CH-90
€22.00
Tax included Manufacturing time 2-7 business days
Domed 3D emblem for your Mercedes Sprinter in the Switzerland design – for the rear doors or, as a pair, on both front wings. 3M silver metallic foil, UV print and a high-gloss PU dome that stays clear.
Swiss-themed shield. Slogan: LEBEN AUF DER AUTOBAHN.
Features
- Fits on the rear doors of the Mercedes Sprinter or, as a pair, on both front wings
- For the wings, order two badges – one for each side
- Size: 90 mm wide, height proportional to the design
- 3M silver metallic foil with UV print – the silver areas shine like real metal
- Reinforced 3M adhesive backing for strong, lasting adhesion
- Polyurethane (PU) dome: high-gloss 3D look with rounded edges
- Strong UV resistance – the dome does not yellow for at least 10 years
Fitting
Apply to a clean, dry, smooth surface where the whole badge lies flat. Keep clear of panel gaps, handles, lights and the registration plate.
Decorative aftermarket accessory, not an original manufacturer part. Mercedes-Benz is mentioned only to identify the vehicle.
Where to place your badge
Example photos – badge design and vehicle may differ from this product.
Popular placements
- Rear doors – a single badge beside the original model lettering or brand emblem.
- Front wings – a matching pair, one on each side between the headlight and the wheel arch (order 2 badges).
- Side panel – next to the sliding door or behind the cab door.
- Campervan & motorhome conversions – on the rear wall or entry door of a van-based camper.
- Fleet look – the same badge on every van of your company fleet.
Apply on a clean, dry, flat or gently curved painted surface (above 15 °C); do not place across panel gaps, door seals or textured plastic. Press firmly for 30 seconds and avoid high-pressure washing for 48 hours.
Pair price: from 2 badges €19 each – a pair for the front wings costs only €38.
✎ All sizes and designs can be customised to your needs – just contact us for a personalised badge.
New
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
No reviews
Tap to zoom