Shopping Cart
Citroën Berlingo K9 2018+ Interior Trim Kit, 33 pcs, manual gearbox
CIBK9-18-33M
€109.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Citroën Berlingo K9. Choose the finish and verify the parts diagram before ordering.
| Make | Citroën |
|---|---|
| Model | Berlingo K9 |
| Model years | 2018-present |
| Generation | 3rd generation (K9) |
| Generation built | 2018–today |
| Variant / specification | manual gearbox |
| Product type | 3D dashboard trim kit |
| Parts included | 33 |
| Product reference | CIBK9-18-33M |
| Versions in our shop | Transmission: automatic / manual + automatic frames / manual |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Citroën Berlingo K9 dashboard trim kit, 33 pieces (from 2018)
A set of 33 self-adhesive trim pieces cut to the dashboard of the Citroën Berlingo K9, model years from 2018. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleCitroën Berlingo K9
- Yearsfrom 2018
- Pieces33
- Versionmanual gearbox
- ReferenceCIBK9-18-33M
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Dash trim kit for commercial vans
Each part for Citroën Berlingo combines 3M 468MP transfer adhesive, the printed decor and a flexible two-component PU dome by COLOR DEC, made in Italy. Around 2–3 mm thick, rounded edges, a glossy depth. Before fitting, degrease thoroughly: dust and cab cleaning sprays are what stops any adhesive taking hold.
- Pre-cut to the parts diagram
- Check year, radio, climate and gearbox
- Driving side chosen at checkout
Choose a finish in your company colours and check the diagram before ordering.
Making the cab a tidy workplace
- Choose a finish that is easy on the eye every day: brushed aluminium, piano black or your company colour.
- Think about what customers see when they walk past the open door.
- For a fleet, one shared finish gives every van the same look.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Citroën Berlingo K9?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
No reviews
Tap to zoom
