DAF XG & XG+ interior: dashboard trim kits and interior accessories for the New Generation

The New Generation DAF XF, XG and XG+, launched in 2021, gave DAF drivers a new cab – and the XG and XG+ in particular are built around more living space for long-haul work. The DAF XG interior is comfortable and quiet, but the dashboard is mostly dark grey plastic. DAF XG accessories such as a 3D dashboard trim kit change that in one afternoon: pre-cut parts in a wood, carbon or aluminium look that go straight onto the original surfaces. This guide explains which kit fits the DAF XG+ interior, the XG and the XF, what to check before ordering, and how to fit it.

1. Which kit fits your DAF XG & XG+

Each kit consists of pre-cut 3D parts in a wood, carbon or brushed-aluminium look. The parts are cut to the parts diagram of one model and cab, topped with a clear PU dome about 2–3 mm thick and stuck onto the original surfaces with 3M adhesive.

One kit for the whole New Generation: the XF, XG and XG+ from 2021 share the same dashboard design, so there is one 27-part kit for the DAF XF, XG and XG+. The XG and XG+ differ from the XF in cab size and interior space, not in the dashboard layout. Before ordering, compare the parts diagram with your DAF XG dashboard and check three things: the radio / navigation unit, the transmission controls and the climate control. The steering-wheel position (LHD or RHD) is selected as an option on the product page – so the same kit is available for right-hand drive trucks in the UK and Ireland.

Every product page shows the parts diagram. Compare it with your own dashboard before ordering: cab size, gearbox controls, radio and switch panels can differ. Driving the previous DAF XF? For the XF106 and XF116 from 2013 to 2021 there is a separate 23-part kit – see all DAF kits. Not sure? Send us a photo of your dashboard.

2. Choosing the finish

The kits come in many printed finishes, and the choice changes the whole mood of the cab:

• Wood look – walnut, mahogany or burl make the cab feel warmer, more like a living room. A popular choice for drivers who spend their weekends in the truck.
• Carbon look – a sporty, technical look that suits modern screens and dark upholstery.
• Brushed aluminium look – a clean, light accent that keeps the cab looking tidy and modern.

All finishes are printed – it is not real wood, carbon or metal – and protected by the clear PU dome, which gives depth and rounded edges. The kits ship high-gloss; for a matte look, spray one thin coat of clear matt lacquer on the parts before fitting.

3. Fitting at a truck stop: step by step

You do not need a workshop. A clean cab, a free afternoon and a little patience are enough.

1. Warm cab. Fit the parts at room temperature, at least +15 °C. In winter, run the heater first – cold adhesive does not bond well.
2. Clean and degrease. Wipe every surface with isopropyl alcohol and let it dry. Cockpit sprays and silicone cleaners prevent the adhesive from sticking.
3. Dry fit first. Hold each part in place without removing the backing and compare it with the parts diagram.
4. Start in the middle. Peel the backing, place the part with one edge first, then press it down firmly from the centre outwards.
5. Press again after 24 hours. The adhesive reaches full strength after about a day; avoid cleaning the parts with solvents in the first days.

Our fitting guide explains the fitting in detail.

4. Driving a company truck?

Many drivers personalise the truck they drive every day, even if it belongs to the company. The kit is stuck onto the existing surfaces and nothing is drilled or dismantled, but ask your fleet manager before fitting it. Owner-operators can of course decide for themselves – and a well-kept cab also looks good when the truck is sold later.

DAF XG & XG+ interior: questions we hear often

Does the same kit fit the DAF XG, the XG+ and the XF?
Yes. The New Generation XF, XG and XG+ from 2021 share the dashboard design, and the 27-part kit is made for all three. Compare the parts diagram before ordering – the radio / navigation unit, transmission and climate control can differ.

Is there a kit for right-hand drive DAF XG trucks?
Yes. The steering-wheel position (LHD or RHD) is selected as an option on the product page.

I drive a DAF XF106 – does the XG kit fit?
No. The XF106 and XF116 (2013–2021) have a different dashboard. Use the 23-part XF106 / XF116 kit instead.

Is it real wood or carbon?
No. All finishes are printed and covered with a clear PU dome.

Do I have to remove the dashboard?
No. The parts go onto the existing, suitable surfaces.

Gloss or matte?
The kits ship high-gloss. For a matte look, spray one thin coat of clear matt lacquer on the parts before fitting.

Find your kit: all DAF truck dashboard trim kits · kits for other truck brands · fitting guide. Questions? Send us a photo of your dashboard.