Shopping Cart
Citroen Jumper 1994-2002 Interior Trim Kit, 32 pcs
3 Reviews
CIJX-94-32
€79.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Citroen Jumper. Choose the finish and verify the parts diagram before ordering.
| Make | Citroen |
|---|---|
| Model | Jumper |
| Model years | 1994-2002 |
| Generation | Typ 230 platform |
| Generation built | 1994–2002 |
| Same cab platform as | Fiat Ducato · Peugeot Boxer |
| Product type | 3D dashboard trim kit |
| Parts included | 32 |
| Product reference | CIJX-94-32 / Original Reference: 1276 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Citroen Jumper dashboard trim kit, 32 pieces (1994–2002)
A set of 32 self-adhesive trim pieces cut to the dashboard of the Citroen Jumper, model years 1994–2002. The pieces go on top of your original panels – nothing is removed or drilled. The same cab is used in the Fiat Ducato and Peugeot Boxer, so the kit is a match there too – check the parts diagram against your dashboard.
All kits for Citroën Jumper Relay · Citroën dashboard trim kits
- VehicleCitroen Jumper
- Years1994–2002
- Pieces32
- ReferenceCIJX-94-32
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Dash trim kit for camper vans
Are stick-on dash kits any good on a van that gets used hard? On Citroën Jumper Relay each part has 3M 468MP transfer adhesive under the decor and a flexible two-component PU dome by COLOR DEC from Italy on top, around 2–3 mm thick with rounded edges, so it is a domed part rather than a thin film.
- Covers marks from the van's working life
- Protects the original surfaces from then on
- Hides wear without repairing it
A doubt about your van's version? Send us a photo of the dashboard.
Checking the right version
- Compare the parts diagram with your cab, as vans come in many versions.
- Check the year, the radio, the climate control and the gearbox.
- Choose the driving side at checkout and send a photo if anything is unclear.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Citroen Jumper?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230005772
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Kratzer im Cockpit gut abgedeckt
Das Dekor deckt Kratzer am Cockpit gut ab. Wichtig ist, die großen Teile langsam auszurichten und die Kanten mit einer weichen Rakel nachzuziehen, besonders wenn die Werkstatt kühl ist.
Buona qualità, montaggio con pazienza
Finitura gradevole e imballo adeguato. L’installazione è semplice, anche se l’allineamento vicino alla radio richiede attenzione.
Kratzer im Cockpit gut abgedeckt
Das Dekor deckt Kratzer am Cockpit gut ab. Wichtig ist, die großen Teile langsam auszurichten und die Kanten mit einer weichen Rakel nachzuziehen, besonders wenn die Werkstatt kühl ist.
Tap to zoom
