Shopping Cart
Honda Civic FA1–FA5 2006-2011 Interior Trim Kit, 4 Door, with Navigation
3 Reviews
HDA-37C
€139.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Honda Civic. Choose the finish and verify the parts diagram before ordering.
| Make | Honda |
|---|---|
| Model | Civic |
| Model years | 2006-2011 |
| Generation | 8th generation (FA1–FA5) |
| Generation built | 2006–2011 |
| Variant / specification | 4-Door; With Navigation system |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | HDA-37C |
| Versions in our shop | Navigation: with NAVI / without NAVI · Body / doors: 2-door / coupe / 4-door / sedan |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: navigation, body / doors, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Honda Civic FA1–FA5 dashboard trim kit, 4-Door, With Navigation system (2006–2011)
A set of self-adhesive trim pieces cut to the dashboard of the Honda Civic FA1–FA5, model years 2006–2011. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleHonda Civic FA1–FA5
- Years2006–2011
- Version4-Door, With Navigation system
- ReferenceHDA-37C
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Ready for the next car meet
On Honda Civic the carbon effect is not a flat film. Underneath the printed decor sits 3M 468MP transfer adhesive; on top, a clear, flexible two-component PU dome by COLOR DEC in Italy. Around 2–3 mm thick, with rounded edges and a glossy depth that catches the streetlights on the drive home from a meet.
- 3M 468MP transfer adhesive on the back of every part
- Original trim stays underneath, protected
- For tricky shapes, a wrapper can help
Browse the finishes for this kit and choose the one that makes your interior recognisable.
Turning factory grey into an interior that is yours
- Start from the outside: dark wheels and a satin wrap call for carbon effect or piano black, a bright paint colour for a matching solid colour.
- Compare the parts diagram of the kit with your dashboard and note which piece goes on which surface.
- Decide whether every surface gets the same finish or whether you want contrast, for example vents and console in a second colour.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Honda Civic?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230009589
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Montage bij kou vraagt geduld
Bij koud weer moet je de montage rustig doen. Ik heb het deel meerdere keren droog gepast, de lijn op het dashboard gecontroleerd en pas daarna de achterste beschermfolie verwijderd en stevig aangedrukt. Getest op een Citroën Jumper interieur met Honey Burl afwerking.
Dobrá kvalita povrchu
Diely majú dobrú kvalitu a presné tvary. Pred montážou bolo dôležité vyčistiť plastový povrch. Po nalepení držia dobre a interiér vyzerá výrazne lepšie. Testované na interiéri Renault Trafic s povrchom Dark Walnut.
Montage bij kou vraagt geduld
Bij koud weer moet je de montage rustig doen. Ik heb het deel meerdere keren droog gepast, de lijn op het dashboard gecontroleerd en pas daarna de achterste beschermfolie verwijderd en stevig aangedrukt. Getest op een Mercedes Sprinter interieur met Honey Burl afwerking.
Tap to zoom
