Shopping Cart
Infiniti G37 V36 2007-2009 Interior Trim Kit, automatic transmission, without NAVI
3 Reviews
IFT-20A
€169.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Infiniti G37. Choose the finish and verify the parts diagram before ordering.
| Make | Infiniti |
|---|---|
| Model | G37 |
| Model years | 2007-2009 |
| Generation | 4th generation (V36) |
| Generation built | 2007–2015 |
| Variant / specification | Full Set; Automatic transmission; Without NAVI |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | IFT-20A |
| Versions in our shop | Transmission: automatic / manual · Navigation: with NAVI / without NAVI |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: transmission, navigation, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Infiniti G37 V36 dashboard trim kit, Full Set, Automatic transmission (2007–2009)
This kit covers the Infiniti G37 V36 (2007–2009) with pre-cut decorative pieces. They are applied over the existing trim, so the original panels stay in the car.
- VehicleInfiniti G37 V36
- Years2007–2009
- VersionFull Set, Automatic transmission, Without NAVI
- ReferenceIFT-20A
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Ready for the next car meet
Nothing sits on a shelf waiting: the kit for Infiniti G37 is made to order, in the finish you choose, in our own workshop, then sent out by carrier. When you order you simply pick left-hand or right-hand drive, which matters if your car is an import.
- 3M 468MP transfer adhesive on the back of every part
- Original trim stays underneath, protected
- For tricky shapes, a wrapper can help
Compare the diagram first, then choose the carbon effect or colour your build is missing.
Turning factory grey into an interior that is yours
- Start from the outside: dark wheels and a satin wrap call for carbon effect or piano black, a bright paint colour for a matching solid colour.
- Compare the parts diagram of the kit with your dashboard and note which piece goes on which surface.
- Decide whether every surface gets the same finish or whether you want contrast, for example vents and console in a second colour.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Infiniti G37?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230012787
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Krassen op dashboard goed bedekt
Goede test voor montage en kwaliteit. De trim bedekt krassen in het dashboard goed. Vooral bij grote delen helpt een rakel om de randen en hoeken strak te krijgen. Getest op een Mercedes Sprinter interieur met Honey Burl afwerking.
Prima levering en nette afwerking
Het resultaat is mooi en de verpakking was goed. De montage is niet moeilijk, maar rond de knoppen moet je nauwkeurig werken. Getest op een Renault Trafic interieur met Brushed Aluminium afwerking.
Krassen op dashboard goed bedekt
Goede test voor montage en kwaliteit. De trim bedekt krassen in het dashboard goed. Vooral bij grote delen helpt een rakel om de randen en hoeken strak te krijgen. Getest op een Iveco Daily interieur met Honey Burl afwerking.
Tap to zoom
