- On sale!
Designer Trim Toyota Land Cruiser Prado J150 2020 Interior Set
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Toyota Land Cruiser Prado. Choose the finish and verify the parts diagram before ordering.
| Make | Toyota |
|---|---|
| Model | Land Cruiser Prado |
| Model years | 2020 |
| Generation | 4th generation (J150) |
| Generation built | 2009–2024 |
| Product type | Custom interior trim |
| Parts included | Not specified |
| Product reference | Product ID 4894 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · Designer Trim
Designer Trim Toyota Land Cruiser Prado J150 – complete interior set
Designer Trim covers every trim surface on the parts diagram of the Toyota Land Cruiser Prado J150, drawn for model year 2020, in one finish of your choice: carbon look, brushed aluminium, wood or a colour matched to your vehicle. The diagram is based on model year 2020; this generation was built 2009–2024. Compare the diagram with your car before ordering – trim layouts can change within a generation.
All kits for Toyota Land Cruiser · Toyota dashboard trim kits
- VehicleToyota Land Cruiser Prado J150
- Diagram model year2020
- Generation built2009–2024
- SetComplete interior set
- FinishYour choice

Material: 3D domed finish
Each piece combines a 3M adhesive base, a decorative film and a clear polyurethane (PU) dome of about 3.5 mm with rounded edges – glossy, with real depth.
Carbon and aluminium looks are decorative surfaces, not structural carbon fibre or solid metal.
Finish or colour match
Choose the finish in the selector above. For a colour match, write your paint code or colour name in the order comment.
The photos show material examples; the colour shown on the product image is not automatically your selection.

Before ordering
- Compare the parts diagram with your interior: trim shapes, screens, gear selector and climate panel.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the pieces on the diagram are included.
Made for you, fitted by you
We cut and dome every piece after your order. Pieces are applied on clean, dry, intact original trim – nothing is removed.
For large sets, a detailing or wrap studio can do the fitting.


Mud outside, a tidy cab inside
Safety stays untouched: the parts for Toyota Land Cruiser never go on an airbag or a moving control. Back from the trail, shake the floor mats out, then wipe the trim with a barely damp microfibre cloth, no abrasives. The glossy layer cleans up quickly even when the outside still carries the mud.
- Sticks onto existing surfaces
- Dashboard stays in place
- Nothing to strip out before the next trip
Choose the finish that suits your 4x4 and check the diagram against your dashboard.
Preparing a cab that lives outdoors
- Shake out the mats and vacuum the dashboard: dust is the main enemy of a clean fit.
- Degrease every surface carefully, especially if you use protectant sprays on the plastics.
- Fit under cover, out of the wind, rather than at the trailhead, and keep a matt option in mind: one thin coat of clear matt lacquer before fitting, dried, then fit.
Designer Trim kit: your order comment is the production order
A Designer Trim kit is a significant investment, between €110 and €1,500 depending on the scope of the project. We don't want you to be disappointed when it arrives. So if anything makes you hesitate, please list point by point in the order comment what you want to see and receive:
- Finish or colour: the decor you want (for example carbon effect, brushed aluminium, wood effect) or your body colour code if the decor should match the paintwork. A matte finish is available on request, coated in our workshop.
- Surfaces: the parts to be trimmed, such as the screen surround, the climate control panel, the door panels, the centre console or the glovebox.
- Driving side and equipment: left-hand or right-hand drive, plus the trim level or any particular features of your vehicle.
- ExtraShield films: whether you would also like the protective films for the screens.
- Photos: pictures of your dashboard and the surfaces concerned, so we see what you see.
This comment is your production order: we work exactly to your instructions. Your payment counts as prepayment for the design project.
FAQ
What is included?
All trim pieces drawn on the diagram for this vehicle, in one finish.
Can you match my body colour?
Yes – give us the paint code or colour name in the order comment.
What about the screens?
ExtraShield screen protector films for many displays are available as separate products.
Want us to check first? Send photos of your interior and the product name via the contact form before we start production.
Buyer guide · Material guide · Installation guide
CockpitDekor · Designer Trim · made to order
- Model
- 2020
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.