Shopping Cart
Ford Mustang S197 2005-2009 Interior Trim Kit, Soft Roof Coupe
3 Reviews
FRD-36D
€134.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Ford Mustang. Choose the finish and verify the parts diagram before ordering.
| Make | Ford |
|---|---|
| Model | Mustang |
| Model years | 2005-2009 |
| Generation | 5th generation (S197) |
| Generation built | 2005–2014 |
| Variant / specification | Soft Roof Coupe; Basic Set |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | FRD-36D |
| Versions in our shop | Set: basic set / full set · Body / doors: 2-door / coupe / convertible |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, body / doors, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Ford Mustang S197 dashboard trim kit, Soft Roof Coupe, Basic Set (2005–2009)
A set of self-adhesive trim pieces cut to the dashboard of the Ford Mustang S197, model years 2005–2009. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleFord Mustang S197
- Years2005–2009
- VersionSoft Roof Coupe, Basic Set
- ReferenceFRD-36D
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Dash trim kit for sports and GT cars
Safety comes before style. The parts for Ford Mustang go only on fixed, compatible surfaces, never on an airbag and never on a moving control. The steering wheel, the switches and the deployment zones stay exactly as the manufacturer designed them, which is how it should be in a car driven quickly.
- Never on an airbag or a moving control
- Steering wheel and switches stay as they were
- Fixed, compatible surfaces only
Black or silver carbon effect: pick the shade that matches your sports car.
Checking the kit against your car
- Compare the parts diagram with your dashboard, especially around the centre stack and the gear selector.
- Check the model year, the gearbox and the equipment, which change the shape of some parts.
- Choose left-hand or right-hand drive at checkout and send a photo if one piece looks different.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Ford Mustang?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230008100
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Montaggio a freddo con pazienza
Con il freddo il montaggio richiede più pazienza. Ho provato il pezzo a secco più volte, controllato bene la linea del cruscotto e solo dopo ho tolto la pellicola posteriore e premuto dal centro verso i bordi. Testato su un interno Mercedes Sprinter con finitura Brushed Aluminium.
Buena calidad, montaje con paciencia
El kit queda bien, aunque hay que revisar la posición antes de presionar. La calidad y el embalaje fueron buenos. Probado en un interior Ford Transit con acabado Brushed Aluminium.
Montaggio a freddo con pazienza
Con il freddo il montaggio richiede più pazienza. Ho provato il pezzo a secco più volte, controllato bene la linea del cruscotto e solo dopo ho tolto la pellicola posteriore e premuto dal centro verso i bordi. Testato su un interno Iveco Daily con finitura Brushed Aluminium.
Tap to zoom
