Shopping Cart
Hyundai Sonata NF 2006-2010 Interior Trim Kit, with Heated Seats, auto AC Control
3 Reviews
HDI-19C
€139.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Hyundai Sonata. Choose the finish and verify the parts diagram before ordering.
| Make | Hyundai |
|---|---|
| Model | Sonata |
| Model years | 2006-2010 |
| Generation | 5th generation (NF) |
| Generation built | 2005–2010 |
| Variant / specification | Full Set,with Heated Seats; Auto AC Control |
| Product type | 3D dashboard trim kit |
| Parts included | Not specified |
| Product reference | HDI-19C |
| Versions in our shop | Climate control: automatic / manual |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, climate control, transmission. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Hyundai Sonata NF dashboard trim kit, Full Set,with Heated Seats, Auto AC Control (2006–2010)
A set of self-adhesive trim pieces cut to the dashboard of the Hyundai Sonata NF, model years 2006–2010. The pieces go on top of your original panels – nothing is removed or drilled.
- VehicleHyundai Sonata NF
- Years2006–2010
- VersionFull Set,with Heated Seats, Auto AC Control
- ReferenceHDI-19C
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Carbon effect without taking the dash out
Worried about summer heat on a black dash? The parts for Hyundai Sonata hold with 3M 468MP adhesive, and what makes the difference is preparation: degrease the plastic properly so no silicone dressing is left under the tape. A newer car or a big kit with lots of curves is a good job for a detailer or wrapper.
- Pre-cut to the parts diagram, no template to trim yourself
- Sticks onto existing surfaces, the dash stays in the car
- Carbon effect, brushed aluminium, piano black or a solid colour
Diagram checked, driving side chosen: all that is left is to pick your finish.
Getting a matt look, then keeping it clean
- Kits ship high-gloss: for a matt finish, spray one thin coat of clear matt lacquer on the parts before fitting and let it dry.
- A second coat gives a flatter but slightly hazy look, so try it on a small part first and buy the aerosol locally.
- Afterwards, wipe the trim with a barely damp microfibre cloth, never with abrasive products or a scouring pad.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Hyundai Sonata?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230012060
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Careful fitting in cold weather
In cold weather I would not rush the installation. I dry fitted the piece several times, checked the dashboard line again, then removed the rear backing film and pressed from the centre out. A small squeegee helped finish the corners cleanly. Tested on a Mercedes Sprinter interior with Honey Burl finish.
Bonne qualité et pose propre
Le kit est arrivé correctement emballé. La qualité visuelle est bonne et le montage s’est fait sans perçage. Le résultat couvre bien les plastiques ternes de l’intérieur. Testé sur un intérieur de Volkswagen Transporter avec finition Brushed Aluminium.
Careful fitting in cold weather
In cold weather I would not rush the installation. I dry fitted the piece several times, checked the dashboard line again, then removed the rear backing film and pressed from the centre out. A small squeegee helped finish the corners cleanly. Tested on a Iveco Daily interior with Honey Burl finish.
Tap to zoom
