Fiat Ducato X250 / X290 (2006–2021) dashboard trim kits: which one fits your van?

The Fiat Ducato is the most common motorhome base in Europe, and from 2006 to 2021 two cab generations dominated: the X250 and, from 2014, the X290. In a motorhome the cab turns towards the living area every evening, which is when the grey dashboard stands out against the wooden furniture.

The Fiat Ducato X250 / X290 (2006–2021) kits in the catalogue

For the X250 (2006–2014) there are a 20-piece and a 23-piece set; for the X290 from 2014 a 25-piece set. The same cab is used in the Citroën Jumper and Peugeot Boxer, which have their own kits in the catalogue.

Compare your dashboard with the parts diagram

Before ordering, sit in the cab with the diagram open on your phone and compare it piece by piece: the radio or navigation unit, the climate control panel, the gear selector area and the switches. Choose left- or right-hand drive when you order. If one opening looks different, send a photo of your dashboard through the contact form and we confirm the right set before production.

Same cab under another badge: Citroen Jumper 2006-2014 Interior Trim Kit, 20 pcs, Citroen Jumper 2006-2014 Interior Trim Kit, 23 pcs, Citroen Jumper 2014 Interior Trim Kit, 25 pcs, Peugeot Boxer 2006-2014 Interior Trim Kit, 20 pcs, Peugeot Boxer 2006-2014 Interior Trim Kit, 23 pcs, Peugeot Boxer 2014 Interior Trim Kit, 25 pcs.

Which finish suits a Fiat Ducato X250 / X290 (2006–2021)?

• Company van: carbon-look, brushed aluminium or piano black look clean and technical and match a fleet livery.
• Camper conversion: walnut or burl wood carry the colour of the furniture forward into the cab.
• Several vehicles: one finish across the fleet gives every driver the same tidy workplace.

Wood and carbon are printed decors under a clear, domed polyurethane layer, not solid wood or real carbon fibre. A cab in real wood or carbon costs thousands of euros; a trim kit gives the look for a fraction of that, and you can change it later.

Fitting without removing the dashboard

Each piece has 3M 468MP transfer adhesive on the back and a clear PU layer of about 2–3 mm on top with rounded edges. Clean and degrease every surface, dry-fit each piece first, then bond it at room temperature. Airbag covers and moving controls always stay free. The kits ship in gloss; a thin coat of clear matt lacquer before fitting gives a matt look. For a large set on a new vehicle, many owners let a wrap installer or detailer do the fitting.

Questions Fiat Ducato X250 / X290 (2006–2021) owners ask

Is this the same as wrapping the dashboard with film?
No. Film from the roll has to be cut and stretched around every vent. These are pre-cut 3D pieces with a domed surface; you place them and press.

What happens to the original panels?
They stay underneath and are protected from then on. Removal can leave adhesive residue that comes off with an interior adhesive remover.

How is a set produced?
Each set is made to order in our own workshop in the finish you choose and sent by courier.

See all Fiat Ducato X250 / X290 (2006–2021) dashboard trim kits, read the buyer guide or the installation guide.