Shopping Cart
Hyundai Santa Fe SM 2001-2002 Interior Trim Kit, 30 pcs, with Automatic Climate-Control
3 Reviews
HDI-10D
€139.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Hyundai Santa Fe. Choose the finish and verify the parts diagram before ordering.
| Make | Hyundai |
|---|---|
| Model | Santa Fe |
| Model years | 2001-2002 |
| Generation | 1st generation (SM) |
| Generation built | 2000–2006 |
| Variant / specification | Full Set; With Automatic Climate-Control |
| Product type | 3D dashboard trim kit |
| Parts included | 30 |
| Product reference | HDI-10D |
| Versions in our shop | Set: basic set / full set |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
CockpitDekor · vehicle-specific dashboard trim
Hyundai Santa Fe SM dashboard trim kit, 30 pieces (2001–2002)
This kit covers the Hyundai Santa Fe SM (2001–2002) with 30 pre-cut decorative pieces. They are applied over the existing trim, so the original panels stay in the car.
- VehicleHyundai Santa Fe SM
- Years2001–2002
- Pieces30
- VersionFull Set; With Automatic Climate-Control
- ReferenceHDI-10D
- FinishHigh-gloss as shipped · matte with 1 coat of clear matt spray before fitting
Material: depth you can see
Each piece is about 2–3 mm thick: a decorative layer under a clear, glossy coat of Italian ColorDec polyurethane with softly rounded edges, and a 3M adhesive layer on the back.
Wood and carbon looks are decorative surfaces – not real wood veneer and not structural carbon fibre.
Choose the finish
Wood grains, carbon weaves, brushed aluminium, piano black or a plain colour: every finish available for this kit is shown as a swatch in the selector above, so you see the surface before you order.
Each kit is made to order in the finish you select.
Check the fit before ordering
- Compare the parts diagram with your own dashboard: radio / navigation unit, gearbox (manual or automatic) and climate controls must match this version.
- Steering wheel side (LHD/RHD): choose it in the option below.
- Only the parts drawn on the diagram are included; mood photos do not define the contents.
Fitting and care
Clean and degrease the surface, dry-fit every piece first, then peel and press firmly. No tools are included; a detailing or wrap specialist can fit complex shapes for you.
Clean with a soft, slightly damp cloth – no abrasives or strong solvents.
Restore the look without stripping the dash
The original wood on many cars of the period had a satin sheen rather than a mirror gloss. The kit for Hyundai Santa Fe ships high-gloss, so for that look spray one thin coat of clear matt lacquer before fitting and let it dry. Test on a small part first; buy the aerosol locally.
- Over 40 finishes depending on the kit
- Faithful to the era or a touch more modern
- Driving side chosen at checkout
Choose the wood effect that suits your car's era and check the diagram before ordering.
Preparing old plastic
- Clean the dashboard thoroughly: decades of dressing products leave a layer the adhesive does not like.
- Degrease with care and let the surface dry fully before fitting the first piece.
- Do not try to fill deep cracks: the decor covers wear, it does not repair a damaged part.
FAQ
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Do I need to remove the dashboard?
No. The pieces are stuck onto the existing panels.
Will it fit my Hyundai Santa Fe?
Yes, if your dashboard matches the parts diagram and the version shown above. If in doubt, send us a photo.
Is the wood look real wood?
No – it is a printed decor under clear polyurethane.
Not sure which version you have? Send a photo of your dashboard and the reference via the contact form – we check it before we make your kit.
Buyer guide · Material guide · Installation guide
CockpitDekor · made to order since 1998
5483230011674
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
3 Reviews
Gute Haftung nach Entfetten
Die Oberfläche wirkt hochwertig. In direkter Sonne wird die PU-Schicht sehr hart und bekommt einen glasähnlichen Glanz. Mit einer Rakel ließen sich die Ecken sauber nacharbeiten.
Buen resultado en el salpicadero
La entrega llegó bien protegida y las piezas estaban en buen estado. La calidad del acabado es buena. Después de probar las piezas en seco, el montaje fue sencillo y el salpicadero quedó más cuidado.
Gute Haftung nach Entfetten
Die Oberfläche wirkt hochwertig. In direkter Sonne wird die PU-Schicht sehr hart und bekommt einen glasähnlichen Glanz. Mit einer Rakel ließen sich die Ecken sauber nacharbeiten.
Tap to zoom
