Shopping Cart
Setra 3-Series 1996-2000 3D Interior Dashboard Trim Kit 13-Piece
SESX-96-13
€229.99
Tax included Manufacturing time 2-7 business days
Vehicle-specific decorative overlay kit for the existing interior surfaces of your Setra 3-Series. Choose the finish and verify the parts diagram before ordering.
| Make | Setra |
|---|---|
| Model | 3-Series |
| Model years | 1996-2000 |
| Product type | 3D dashboard trim kit |
| Parts included | 13 |
| Product reference | SESX-96-13 / Original Reference: 1727 |
| How to check your version | Before ordering, check on your vehicle and compare with the parts diagram: radio / NAVI unit, transmission, climate control. Steering wheel position (LHD/RHD): select it in the option below. |
Setra 3-Series 1996-2000 3D Interior Dashboard Trim Kit 13-Piece
Finish: High-gloss as shipped · matte with 1 coat of clear matt spray before fitting.
Is the kit available in matte?
The kit ships high-gloss. For a satin or matte look, spray one thin coat of clear matt aerosol lacquer for cars on the parts before fitting (for example SprayMax Klarlack matt or NOVOL Clearcoat Matt), let it dry, then fit as usual. One coat takes the gloss off; a second gives a flatter but slightly hazy look. Try a small part first. We don’t ship aerosols; you’ll find them in car accessory shops.
Your favourite colour or grain can change how the dashboard feels without changing its layout.
This decorative trim kit adds a new finish to the existing interior surfaces of your Setra 3-Series. Choose from the finishes offered for this kit and keep the cabin layout you already know.
The useful part, at a glance
A coordinated finish across the supplied pieces helps the cabin look considered. The trim overlays the existing surfaces, so you are choosing a new appearance for familiar parts of the interior.
| Everyday result | A different colour or pattern on the interior areas covered by this kit. |
|---|---|
| What you fit | Vehicle-specific self-adhesive overlay pieces, matched against the supplied product diagram. |
| What you choose | The available finish and the correct equipment or steering-wheel version, where offered. |
Illustration of trim finish and construction. Use the vehicle-specific product diagram to check the supplied shapes.
Check your vehicle and version
| Vehicle make | Setra |
|---|---|
| Model | 3-Series |
| Manufacturing years | 1996-2000 |
| Listed variant | All Models and Versions |
| Quantity of trim parts | 13 |
| Product reference | SESX-96-13 / Original Reference: 1727 |
The layout check
Compare your radio or navigation opening, climate controls, switches, gear selector and steering-wheel position with the product diagram. Follow every equipment restriction in the product name and listed variant; a shared model name alone does not establish a match.
Finish and construction
| Appearance | Choose from the finishes available on this product page. Wood-style, carbon-look and other decoration names describe the selected appearance. |
|---|---|
| Protective surface | A high-gloss polyurethane or PU-domed surface is used where specified for the selected finish. |
| Fitting method | Adhesive-backed decoration applied to the prepared original surface. |
What the pictures show
The retained illustrations show the decorative effect and construction. Use the vehicle-specific diagram for the actual piece shapes and coverage; the selected finish determines the colour and pattern you receive.
Fitting, step by step
1. Compare before peeling
Lay out the pieces and check each one against its intended position while the backing is still attached. Take your time. The cut-outs and edges should line up naturally.
2. Prepare the bonding surface
Follow the installation instructions to remove dust, grease and surface-treatment residue. A clean-looking dashboard can still carry polish or silicone that affects adhesion.
3. Align, press and inspect
Position each piece carefully before applying firm pressure. Follow the kit instructions for temperature, pressing and the time needed before cleaning or stressing the edges.
Read the dashboard trim installation guide before you begin.
Before you add it to your basket
Confirm the vehicle version, compare the diagram and choose your finish. If an opening or control layout differs, ask about vehicle compatibility before fitting.
Illustration of trim finish and construction. Use the vehicle-specific product diagram to check the supplied shapes.
A tidy cockpit facing the passengers
Safety first, always: the parts for Setra never go on an airbag or a moving control. For daily cleaning, a barely damp microfibre cloth is enough, no abrasives. Before fitting, degrease the dashboard well; a coach cab that is cleaned with sprays every night needs a properly clean surface.
- One finish across the fleet
- Fitting by a professional keeps it consistent
- Made to order in our own workshop
Choose a finish in line with your livery and check the diagram before ordering.
Fitting across a fleet
- List the vehicles concerned and plan the fitting in a quieter season.
- Degrease each dashboard carefully; vehicles cleaned daily with sprays need a properly clean surface.
- For several coaches, a detailing professional keeps the result consistent.
All kits for Setra · coaches dashboard trim kits · Buyer guide · Material guide · Fitting guide · Contact & advice
5483230027309
The kit is fitted over the existing surfaces – no dismantling of the dashboard.
- Clean and degrease every surface; silicone and interior sprays stop the adhesive from holding.
- Dry-fit each part against the parts diagram before removing the backing film.
- In a cold car, warm the parts and the dashboard slightly first.
- Press each part firmly from the centre to the edges.
- Avoid washing or stressing the edges for 24–72 hours.
Every kit is made in your choice of finish, protected by a high-gloss 3D polyurethane layer.
- Wood (burl, walnut, maple): warm, classic, premium look.
- Carbon fibre: sporty and technical.
- Brushed aluminium: cool, modern, close to OEM.
- Piano black and solid colours: clean or personalised.
- The finish changes the look only – always check the version of your dashboard first.
A kit is made for one exact dashboard layout. Before ordering, check:
- make, model, production year and generation (before or after facelift);
- manual or automatic gearbox;
- manual or automatic climate control, radio / NAVI unit;
- the parts diagram and number of parts in the product photos;
- steering wheel position: select it in the option above the finishes.
No reviews
Tap to zoom
